2MY-2HB
Three phase motor integrated 2HB pump
- ● Three phase motor integrated
- ● Motor output: 200W/400W/750W/1500W
- ● Small capacity (2.8~20㎤/rev)
- ● Middle discharge pressure type
Applications | Transfer of hydraulic, lubricating and cooling oil | Fluid compatibility table |
---|---|---|
Permissible fluid temperature | -5~80℃ (23°F~176°F) | Lists of applicable seal kit, bearing, seal and gasket material options for special specification |
Permissible fluid viscosity | 10~500mm²/sec | |
Rotation direction | Selectable | More details |
With internal relief valve (VB type) With external relief valve (VD type) | Selectable | About relief valve |
Specification
Model | Theoretical discharge ℓ/min (US gal/min) | Motor rotation speed 50Hz/1500rpm | Theoretical discharge ℓ/min (US gal/min) | Motor rotation speed 60Hz/1800rpm | ||||||
---|---|---|---|---|---|---|---|---|---|---|
Max. discharge pressure MPa (psi) | Max. discharge pressure MPa (psi) | |||||||||
200W | 400W | 750W | 1500W | 200W | 400W | 750W | 1500W | |||
TOP-203HBM | 4.2 (1.11) | 1.7 (246.56) | 3.0 (435.11) | 3.0 (435.11) | 3.0 (435.11) | 5 (1.32) | 1.3 (188.55) | 3.0 (435.11) | 3.0 (435.11) | 3.0 (435.11) |
TOP-204HBM | 6 (1.59) | 1.2 (174.05) | 3.0 (435.11) | 3.0 (435.11) | 3.0 (435.11) | 7.2 (1.9) | 0.9 (130.53) | 2.3 (333.59) | 3.0 (435.11) | 3.0 (435.11) |
TOP-206HBM | 9 (2.38) | 0.7 (101.53) | 1.8 ( 261.07) | 2.5 (362.60) | 2.5 (362.60) | 10.8 (2.85) | 0.5 (72.52 ) | 1.4 (203.05) | 2.5 (362.60) | 2.5 (362.60) |
TOP-208HBM | 12 (3.17) | 0.5 (72.52) | 1.3 (188.55) | 2.5 (362.60) | 2.5 (362.60) | 14.4 (3.8) | 0.3 (43.51) | 1 (145.04) | 2.3 (333.59) | 2.5 (362.60) |
TOP-210HBM | 15 (3.96) | 0.4 (58.02) | 1.1 (159.54) | 2.5 (362.60) | 2.5 (362.60) | 18 (4.76) | 0.3 (43.51) | 0.9 (130.53) | 2 (290.08) | 2.5 (362.60) |
TOP-212HBM | 18 (4.76) | 0.3 (43.51) | 0.9 (130.53) | 2 (290.08) | 2 (290.08) | 21.6 (5.72) | ー | 0.7 (101.53) | 1.6 (232.06) | 2 (290.08) |
TOP-216HBM | 24 (6.34) | 0.2 (29.01) | 0.7 (101.53) | 1.5 (217.56) | 1.5 (217.56) | 28.8 (7.61) | ー | 0.5 (72.52) | 1.2 (174.05) | 1.5 (217.56) |
TOP-220HBM | 30 (7.93) | ー | 0.4 (58.02) | 1.2 (174.05) | 1.2 (174.05) | 36 (9.51) | ー | 0.3 (43.51) | 0.9 (130.53) | 1.2 (174.05) |
Model numbering system | Performance table |
○ TOP-2HB series is replacement model to TOP-A series. Performance and installation dimention are compatible. Note that piping type is changed from G type to Rc type.
■Motor Specification
○ 3-phase squirrel-cage induction motor ○Totally enclosed ○Class E insulation (200W, 400W)
○ Class F insulation (750W,1500W) ○Protection level: IP44
Output (W) | Number of pole (P) | Rating | Class 200V | Class 400V | Approx. Weight kg(lbs) | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Voltage (V) | Frequency (Hz) | Rotation speed (rpm) | Curent (A) | Voltage (V) | Frequency (Hz) | Rotation speed (rpm) | Curent (A) | ||||
200 | 4 | Cont. | 200 200 220 | 50 60 60 | 1440 1720 1730 | 1.34 1.12 1.17 | 380 400 400 440 | 50 50 60 60 | 1440 1440 1720 1740 | 0.64 0.67 0.56 0.58 | 6.5 (14.33) |
400 | 4 | Cont. | 200 200 220 | 50 60 60 | 1420 1710 1730 | 2.20 1.93 1.95 | 380 400 400 440 | 50 50 60 60 | 1420 1430 1710 1730 | 1.08 1.11 0.96 0.97 | 9 (19.84) |
750 | 4 | Cont. | 200 200 220 | 50 60 60 | 1440 1720 1740 | 3.30 3.10 3.00 | 400 400 440 | 50 60 60 | 1440 1720 1740 | 1.67 1.55 1.48 | 14 (30.86) |
1500 | 4 | Cont. | 200 200 220 | 50 60 60 | 1450 1740 1750 | 6.90 6.20 6.00 | 400 400 440 | 50 60 60 | 1450 1740 1750 | 3.40 3.10 3.00 | 22 (48.5) |
・750W and 1500W motors comply with requirements of IE3, CE marking and class F insulation.
・200W and 400W comply with IE2. *Except enhanced safety-type.
*Consult us if motor other than for standard volatage is connected.
FAQ
- How to check model name/specification of all Trochoid® pump.
-
See and check with NOP Trochoid product guide on this website.
- How to check specs for Trochoid® pump with built-in motor.
-
See and check with NOP Trochoid® pump product guide on this website.
- What kind of fluid can be transported by NOP® pump?
-
Trochoid® pump is able to transport oil, but some models enable to transport coolant fluid for machine tool, fuel oil ,medical-use fluid. Water can be transferred by PROCON® pump.
*Gasoline and volatile oil can NOT be transferred by NOP pump.
See details here
Contact us if you have something unclear.
If you have any question on NOP® products, please take a look at "FAQ" at the first place.
If you can not find suitable answer, please give your inquiry via "Contact to" or phone-call.